LC20

LC20 levels the TBN, reduces oxidation, provides an extra measure of lubricity, provides extra rust control, and will literally melt (soften and emulsify) carbonaceous deposits. It then places these carbonaceous deposits into the oil solution. LC20 keeps your oil in good condition and reduces oxidation so well that oil change intervals can be extended. We recommend changing oil at 10,000 miles when adding LC20 every 1,000 miles. LC20 can also be used as a cylinder preparatory storage oil (squirted into the individual cylinder) in automotive and small engines to clean carbon deposits and keep rings and cylinders from rusting during storage. 2-cycle and 4-cycle engines that have stuck rings can be unstuck with LC20.

LC20 works with all forms of motor oils, including synthetic, and has a variety of uses such as end of season storage, removing carbon and varnish, and pre-conditioning the rings before startup. This product will also enhance hydraulic systems, as proven in a report preformed by Dysonís Analysis.

The recommended treatment rate of LC for engine lubes in 4-cycle
gasoline or Diesel engines is 1 0z./Quart for the initial dose, and 1-2 oz. every 1,000 miles or 1,610 km. Do not overfill crankcase.

Please check out our testimonial page. We have hundreds of satisfied customers!


How will LC20 prolong your oil's life ?

LC20 is a special blend of chemicals that is designed to clean and protect your engines oil, power steering, and automatic transmission systems. This product will break down and dissolve carbon deposits that can be harmful to your engine and it will penetrate into even the smallest spaces in your engine to clean and lubricate. LC20 works so well at keeping your oil clean that we recommend you change your oil every 10,000 miles instead of every 3,000 miles saving both time and money.

LC20 works with all forms of motor oils, including synthetic, and has a variety of uses such as end of season storage, removing combustion, and pre-conditioning the rings before startup. This product will also enhance hydraulic systems, as proven in a report preformed by Dysonís Analysis.

The recommended treatment rate of LC for engine lubes in 4-cycle
gasoline or Diesel engines is 1 0z./Quart for the initial dose, and 1
oz. every 1,000 miles or 1,610 km. Do not overfill crankcase.

Please check out our testimonial page. We have hundreds of satisfied customers!
 
Buy Now >>>
 
 

With an order of any combination of 2 gallons of LC20 or FP60 you will receive a measuring bottle to help you put the exact amount of LC20 and FP60 needed in your automobile. The measuring bottle is shown in the center.


 

Save your money
The savings alone will sell this product.  For example, if you drive a car that holds a 5 quart motor oil system, you spend an average of $25 per oil change every 3,000 miles.   Instead of replacing your oil every 3,000 miles how about spending that $25 on LC20 and extend your oil's life to 10,000 miles or more.
 
     
 
LC20
FP60
Commercial orders
Our Polices
Contact us
Testimonials
Lab Reports
FAQ
Web Links
lubecontrol.com bulletin board
How did you hear about us?
Find a Distributor Near You
Terms of Service
 
 

Please get in touch to offer comments
and join our mailing list for sales and specials! You can e-mail us at: service@lubecontrol.com
Lube Control Distributors